Hardware required for network connection:
CIM 500
Product number: 98301408
The CIM500 interface offers easy integration into both new and existing systems, as the Modbus TCP protocol is a standard protocol supported by numerous control and automation systems.
With a rotary switch, you can easily change the protocol to PROFINET IO, Bacnet Ip and Ethernet IP.
An integrated webserver allows easy Ethernet parameter changes to configure the CIM500 to the wider system.
Learn more about the module in the Grundfos Product Center
Basic information on Grundfos Gateways for Modbus TCP networks
The Grundfos MGE motor has several analogue inputs and an integrated PI controller. This means that a control loop consisting of pump and sensor can be set up directly.
Use our MGE sensor installation guides.
With the "Grundfos GO Link" tool, you can use your laptop to parameterise Grundfos e-pumps and control units, save settings or create commissioning logs. The laptop can be connected to the device via an Ethernet cable if it is supported or via a Grundfos MI 301 (98046408). Alternatively, a Grundfos PC-Tool Link USB (96705378) box can also be used if you are working in radio-free environments.
With the "Grundfos GO Remote" app, you can use your smartphone or tablet to parameterise Grundfos pumps and controllers, save settings and create commissioning logs.
The app can be connected to the device via Bluetooth if it is supported or via a Grundfos MI 301 (98046408). The free smartphone app is available for download in the app stores below:
